7. Enter the auto repeat time (0 to 99.9 seconds) using the up and down arrows then select
“Next”. The auto repeat time is the time between when a dispense cycle ends and the next
dispense cycle is automatically initiated when in the auto repeat mode.
Notice:
The auto repeat time is only used in auto repeat mode.
Notice:
The longer you hold the up and down arrow keys the faster the numbers will
scroll. Release the button before reaching the desired time and toggle in on the final time.
8. Enter the start position for event #1 in degrees (0 to 890 degrees) using the up and down
arrows then select “Next”. The start position and end positions must be determined in the set up
mode before entering a program. If this has not be done, please see section 5.2.4 for instructions
and do so now.
.
26
