HemoCue HbA1c 501, Operating Manual

Page: 15 / 264

13
11. RUN a HbA1c TEST
Reagent pack sampling area
Use of Venous Blood
Venous whole blood collected in tubes with K2EDTA, lithium heparin, sodium
citrate or sodium fluoride/oxalate as an anticoagulant can be used.
Venous whole blood can be stored at 2-8°C for 7 seven days with unbroken seal (only
3 days when seal is broken) and at 20-25°C for 3 days.
Mix the tube thoroughly prior to testing. Open the lid and take out one drop of
blood with a pipette. Place a drop of blood on a hydrophobic surface. Gently touch
the drop of blood with the tip of the sampling area of the reagent pack. Ensure that
the sampling area is completely filled.
NOTE: Do not wipe off excess blood outside the sampling area.
Do not touch the open end of the sampling area.
CAUTION: There is a potential risk of biological hazard.
All parts of the HemoCue® HbA1c 501 System should be considered
potentially infectious.
• Use gloves
• Dispose used test cartridges in a sturdy container with lid
• Consult local environmental authorities for proper disinfection
procedures as well as disposal of consumables
[adequate]
[inadequate]
sampling area
GB