HemoCue 201 DM, Reference Manual

Page: 175 / 203

170
FIGURE 8-4
For Analyzer in Secondary Docking
Station (2), the following applies:
• Analyzer Data is transmitted via the
Secondary Docking Stations to the
Primary Docking Station (1), see Arrow (7).
The Primary Docking Station (1) transmits
the Data to the PC (4), see Arrows (5).
• Analyzer Settings are transmitted from
the PC (4) via the Primary (1) and
Secondary Docking Stations, to the
Analyzers in the Secondary Docking
Station (2), see Arrow (6) and (8).
Secondary Docking Station in such a set, can
at the same time be connected separately to
a PC via USB and then the USB connection
will override the LAN connection. Normally
there is no reason for this type of
configuration.
For Secondary Docking Stations labelled
SDS
+ , in such a set, the Analyzer needs to be
restarted or re-docked to establish
connection to PC via USB.
To restore the LAN connection for the
Secondary Docking Station labelled SDS
+
,
remove the USB cable and restart or re-dock
the Analyzer in the Docking Station.
To make settings on the Primary Docking
Station in such a set, e.g. the IP-address, it
must be directly connected to a PC via a
USB (the same type of connection a
Secondary Docking Station uses for data
communication, see
FIGURE 8-2 ).
1 Primary Docking Station
2 Secondary Docking Station
3 LAN
4 PC hosting the DMS Software or OR
5 Analyzer Data to PC
6 Analyzer Settings from PC
7 Analyzer Data from Secondary via Primary
8 Analyzer Settings to Secondary via Primary
1
6
5
4
2
3
7
8