HemoCue 201 DM Reference Manual Download Page 122

Page: 122 / 203

117

Comments

Delete

Add

Expired Cuvette

Air bubble

FIGURE 4-22

All added comments are displayed. In this
example,

Air bubble

and

Expired Cuvette

are

displayed.

g) Press the Scroll bar arrows (11) to select a

Comment, in this example

Expired

Cuvette

h) Press the Delete button (12)

11 Scroll bar arrows
12 Delete button

Comments

Delete

Add

Expired cuvette

FIGURE 4-23

i) When all comments that are to be added

are displayed in the Comment list (13),
press the Confirm button (14).

If the Previous image button (15) is pressed,
this text will be displayed:

If you continue no comment changes will
be saved. Continue?

Continue

is pressed again all changes

entered in the Comment list (13) will be lost.

If an attempt is made to add more than four
comments to the result, the following text
will be displayed:

Maximum four Comments are allowed.

FIGURE 4-24

will be displayed.

13  Result Comment list
14  Confirm button
15  Previous image button

Summary of Contents for 201 DM












































































































































































































Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands

HemoCue 201 DM, Reference Manual

Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands