HemoCue 201 DM Reference Manual Download Page 121

Page: 121 / 203

116

Add Comment

Add

Comment:5

Comment:6

Free Text

Air bubble

Comment:5

Comment:6

Free Text

Expired cuvette

Comment:4

FIGURE 4-20

This list will be empty if no comments have
been pre-defined in the Settings menu, see

3.2.4 Define Comments

c) Press the Scroll bar arrows (4) to select a

Comment (5). In this example:

Expired

Cuvette

d) Press the Add button (6).

FIGURE 4-21

will be displayed.

If information is to be added as text and
numbers or via the Barcode Scanner, press
the Free text button (7).

4  Scroll bar arrows
5  Selected comment
6  Add button
7  Free text button

Comments

Delete

Add

Expired cuvette

FIGURE 4-21

The added comment is displayed in the
Comment list (8).

e) If more comments are to be added, press

the Add button (9) again and repeat the
procedure according to

FIGURE 4-20

f) If comments are to be deleted, press the

Delete button (10).

FIGURE 4-22

will be displayed.

8  Result Comment list
9  Add button
10  Delete button

Summary of Contents for 201 DM












































































































































































































Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands

HemoCue 201 DM, Reference Manual

Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands