Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
75
Commissioning/functional check
Extend and retract the unit in and out completely. When extending the unit
for the first time, make sure no one is in the operating radius or standing
below the unit.
Make sure that during the later operation the units can be extended freely
and without blockings. Do not extend the unit, if objects or persons are in
the operating radius of the sun protection unit. Please observe the safety
instructions.
After the first extending check the mounting material and the construction
elements for strength.
Automatic control devices or switches, that are not in the operator's field of
vision, may not be used for test runs of motor driven units.
We recommend the use of a test cable for the provisional operation of the
motor.
Check all settings.
Check all screwed connections for tightness.
The awning is a sun protection device that is only allowed to be used for
the intended use. Wrong use can put the user in danger.
Additional loadings such as objects that are sticked to the awning or cord
tensionings can damage the awning or lead to its crashing, and are
therefore not allowed.
Clean the elements (see maintenance instructions).
Pass these instructions as well as possible instructions of the motor,
switch and control manufacturer on to the user.
Brief the user, whereupon you provide comprehensive information on the
safety and user instructions of the system.
Have the correct design of the system as well as the installation and
briefing with the safety information confirmed in writing (see handover
report).
Installation Instructions and Instructions for Use
76
Subject to technical modifications. – Date of Issue
September/2020
Removal and Disposal
With removal or disposing of the awing, the parts that are under prestress
(e.g. articulated arms, counter draw systems) must be completely released
from tension and protected against unintentional drawing-out before
removal.
For this, please contact a specialist enterprise.
Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
77
Handing over report (for the fitter)
Dear Customer,
We are glad that you have opted for a HELLA brand product. Our units are fabricated with
greatest care and many years of experience.
The instructions for use and the installation instructions have been handed over and must
be read before using the product.
An introduction has taken place.
The safety instructions were pointed out.
Your product
Cassette awning PAN 7040
was manufactured in accordance with EN 13561:2004+A1:2008
and was installed professionally and handed over
on the .................................................................................................................................... .
Sloping projection ...................................................................................................................
Width ......................................................................................................................................
Dealer
Name
Place
Postal code
Date
Name
Street
Customer
Place
House number
Signature
Signature
Date
First name
Installation Instructions and Instructions for Use
78
Subject to technical modifications. – Date of Issue
September/2020
Handing over report (for the user)
Dear Customer,
We are glad that you have opted for a HELLA brand product. Our units are fabricated with
greatest care and many years of experience.
The instructions for use and the installation instructions have been handed over and must
be read before using the product.
An introduction has taken place.
The safety instructions were pointed out.
Your product
Cassette awning PAN 7040
was manufactured in accordance with EN 13561:2004+A1:2008
and was installed professionally and handed over
on the .................................................................................................................................... .
Sloping projection ...................................................................................................................
Width ......................................................................................................................................
Dealer
Name
Place
Postal code
Date
Name
Street
Customer
Place
House number
Signature
Signature
Date
First name
