Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
63
Replacing a folding arm with integrated LED
lighting
Control of the LED lighting with the control module ONYX
®
The configuration, commissioning and operation of the LED lighting with the control module
ONYX
®
are described in more detail on the pages to follow.
Legend
Power supply unit
Control module ONYX
®
Connection point
1
2
3
Installation Instructions and Instructions for Use
64
Subject to technical modifications. – Date of Issue
September/2020
Technical data
LED control module for awning ONYX
®
Input
200 – 240 VAC / 50-60 Hz
Output
24 VDC PWM
Power consumption in the standby mode
0.5 W
Maximum power consumption
(depends on the size of the awning)
90 W
IP rating
IP 55
Permitted operating temperature range
-20 °C to +55 °C
Radio frequency
868.3 MHz
Transmission power
12.6 mW
Installation type
Already ex works mounted in the LED
awning from HELLA Sonnen- und
Wetterschutztechnik
Channels 1
Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
65
Configuration
Once the connection cable of the ONYX.LED is supplied with voltage, the
lighting of the awning switches on briefly and then is dimmed slowly. In
this way you can ascertain, if the awning lighting is connected correctly.
This process is no longer performed, when ONYX.LED is already
connected with a hand-held radio transmitter ONYX.CLICK or with
ONYX.CENTER.
Before configuring the ONYX.LED, download HELLA’s free app ONYX
®
from the App store/Google Play to your smart phone.
Configuration ONYX.LED with ONYX.CLICK (without ONYX.CENTER)
Before you can use ONYX.LED in combination with the hand-held radio
transmitter ONYX.CLICK, ONYX. CLICK must be connected with the app
ONYX
®
. Once the hand-held radio transmitter is connected with the app,
the menu item
"Configure devices”
opens. You can now add a new
awning lighting ONYX.LED with
"+"
. The camera opens. By tapping on
ޔ´
in the lower area of the screen, a window opens showing all available
devices. The overview displays ONYX.LED as
"LED"
. ONYX.LED is
connected with the hand-held radio transmitter via
"Adaption to the
system”
. Then follow the instructions on the screen. The configuration is
continued as described in the instructions for use for ONYX.CLICK.
Configuration of ONYX.LED with ONYX.CENTER
Before you can use ONYX.LED in combination with ONYX.CENTER,
ONYX. CENTER must at first be connected with the app ONYX
®
as
described in the instructions for use. Once ONYX.CENTER is set
completely, the
"Configuration mode"
is activated. You find it under
"Settings"
.
Under the menu item
devices
a new awning lighting ONYX.LED can now
be added with
"+"
. The camera opens. By tapping on
ޔ´
in the lower
area of the screen, a window opens showing all available devices. The
overview displays ONYX.LED as
"LED"
. ONYX.LED is connected with
the hand-held radio transmitter via
"Adaption to the system”
. Then
follow the instructions on the screen. The configuration is continued as
described in the instructions for use for ONYX.CENTER.
Installation Instructions and Instructions for Use
66
Subject to technical modifications. – Date of Issue
September/2020
Operation
Operation via the hand-held radio transmitter ONYX.CLICK
The lighting is switched on and off with the two pushbuttons “UP” and
“DOWN”. If one of the two pushbuttons is pressed longer, the lighting can
be dimmed. If this pushbutton is released, the current brightness of the
lighting is kept. The current brightness is reset after the switching on.
Groups with different shading and light control devices can be configured
freely at the hand-held radio transmitter ONYX.CLICK. All elements in one
group can be controlled together.
Per group configured one brightness value can be saved at the hand-held
radio transmitter ONYX.CLICK, so that it can easily be assessed again at
a later time.
Operation via the app ONYX
®
The awning lighting switches on or off by tapping on the respective icon of
the lighting. The current brightness is reset after the switching on.
By swiping up or down over the respective icon of the lighting, the awning
lighting is dimmed up to the maximum/minimum brightness.
Whilst the awning lighting is dimmed, the desired brightness can be kept
by briefly tapping.
