Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
39
Awning installation modular
The coupling screws must be inserted at the relevant slot in the statics
profile (2). The coupling screws are provided in the correct quantity.
This installation step connects the lower modular assembly with the upper
one.
Legend
Coupling screw DIN 912 M6x120
Slot in the statics profile
Upper modular assembly
Allen key A/F 5
Note!
With design with LED lighting it must be ensured that no cables are
damaged when inserting the coupling screw (1).
1
3
2
4
Installation Instructions and Instructions for Use
40
Subject to technical modifications. – Date of Issue
September/2020
Awning installation modular
Screw the upper modular assembly (3) with 2 pan head self-tapping
screws (1) on the sides on both ends together with the lower part of the
static profile (2).
Legend
Pan head self-tapping screw DIN 7981C 3.9x25 AW20
Statics profile bottom
Upper modular assembly
1
2
3
Installation Instructions and Instructions for Use
Subject to technical modifications. – Date of Issue
September/2020
41
Awning installation modular
Slide the cable profile (2) in the first step, as shown, into the profile profile
(1).
Finally, in the second step, clamp in the inlet guides (3). Then screw as
described on the following page.
Legend
Front rail
Keder profile
Running-in aid
1
2
3
1.
2.
3.
Installation Instructions and Instructions for Use
42
Subject to technical modifications. – Date of Issue
September/2020
Awning installation modular
Fasten the fastening screws (3) to the failure profile (1) to secure the seal
profile (2) with the inlet guide (4). Position these at each cloth seam - see
the view from above (7).
Legend
Front rail
Keder profile
Fastening screw DIN 912
M6x12
Running-in aid
Allen key A/F 5
Cover
View from the top
5
1
2
3
4
1
6
4
7
