Hella PAN 7040 Installation Instructions Manual Download Page 1

Installation Instructions and Instructions for Use 

 

 

 

 

 

These instructions must be read

 

prior to installation

 

and use!

 

 

 

 

  

 

 

 

Cassette awning PAN 7040 

  

 

 

 

Operating guidelines 

  

Installation Instructions and Instructions for Use 

 

 

 

Table of Contents 

Preliminary remarks HELLA Cassette awning PAN 7040 .............................................................. 1

 

General notes .................................................................................................................................. 2

 

CE marking ..................................................................................................................................... 3

 

Safety instructions ........................................................................................................................... 4

 

Designated use ............................................................................................................................... 8

 

Servicing, maintenance and repair ................................................................................................. 9

 

Operating guidelines ..................................................................................................................... 12

 

Before installation ......................................................................................................................... 13

 

Overview Cassette awning PAN 7040 .......................................................................................... 14

 

Overview tensioning bracket types ............................................................................................... 15

 

Wall bracket installation ................................................................................................................ 16

 

Installation on concrete ................................................................................................................. 19

 

Installation on concrete up to 60 mm ETICS ................................................................................ 20

 

Installation on concrete 60-200 mm ETICS .................................................................................. 21

 

Installation on brickwork ................................................................................................................ 22

 

Installation on brickwork 60-170 mm ETICS ................................................................................. 23

 

Installation on wood ...................................................................................................................... 24

 

Installation on wood 60-170 mm ETICS ....................................................................................... 25

 

Installation on concrete ceiling face, installation set 10 ................................................................ 26

 

Further installation situations, installation set 10 .......................................................................... 29

 

Installation of the awning .............................................................................................................. 30

 

Awning installation modular .......................................................................................................... 34

 

Adjusting the awning ..................................................................................................................... 46

 

Upper covering profile inspection ................................................................................................. 50

 

Electric commissioning and overview table power ....................................................................... 54

 

Activation guidelines for electric drives ......................................................................................... 56

 

Wiring diagram for motors with switch operation .......................................................................... 57

 

Wiring diagram for motors with Somfy io ...................................................................................... 57

 

Wiring diagram for motors with ONYX.NODE .............................................................................. 58

 

Wiring diagram for motors with ONYX.CONNECTOR ................................................................. 58

 

Overview LED lighting with remote control ................................................................................... 60

 

Replacing a folding arm with integrated LED lighting ................................................................... 61

 

Technical data ............................................................................................................................... 64

 

Configuration ................................................................................................................................. 65

 

Operation ...................................................................................................................................... 66

 

Operating guidelines ..................................................................................................................... 67

 

Ideal use of the radio signal .......................................................................................................... 67

 

Fault removal ................................................................................................................................ 68

 

Disposal ........................................................................................................................................ 68

 

Commissioning/functional check .................................................................................................. 75

 

Removal and Disposal .................................................................................................................. 76

 

Handing over report (for the fitter) ................................................................................................ 77

 

Handing over report (for the user) ................................................................................................ 78

 

 

Installation Instructions and Instructions for Use 

 

 

 

Subject to technical modifications. – Date of Issue 

September/2020 

Preliminary remarks HELLA 
Cassette awning PAN 7040 

 

  

With this HELLA product you have opted for a high-quality product with a most up-to-date 
technology that can nevertheless be easily installed and operated. In these instructions we 
describe the basic installation, commissioning and use. 

  

 

  

 

For authorized specialist staff 

 

For the consumer (user) 

  

 

  

The following symbols will assist you with the installation or use and require a safety-
conscious conduct: 

  

 

Attention! 

This symbol indicates instructions that, if disregarded, can put the 
user in danger. 

 

Attention! 

This symbol indicates instructions that, if disregarded, can potentially 
result in damage to the product. 

 

This symbol indicates instructions for use or helpful information. 

 

This symbol requires you to act. 

 

Attention! 

This symbol indicates a risk of injury or danger to life due to an 
electric shock. 

 

This symbol indicates parts of the product, for which you will find 
important information in these installation instructions. 

  

Installation Instructions and Instructions for Use 

 

 

Subject to technical modifications. – Date of Issue 

September/2020 

 

General notes 

 

  

 

Questions 

In case of questions concerning the installation or the use of your product, please 
consult your authorized specialist shop. 

  

 

  

 

Spare parts/repairs 

Spare parts are available at your HELLA specialist shop. Only spare parts that are 
approved by HELLA are allowed to be used. 

  

 

  

 

Warranty/guarantee 

Precondition for warranty and guarantee is a correct and regular maintenance of the sun 
protection device (at least once a year).  
Warranty claims are subject to statutory limitation periods. Service parts are excluded 
from the warranty; the same applies for changes in colour and changes in 
characteristics caused by UV radiation. 

  

 

  

 

Liability 

In case of non-observance of the directions and information given in these instructions 
and in case of improper operation or unintended use, the manufacturer shall not accept 
any warranty claims concerning any damage to the product. In these cases the liability 
for consequential damage to any parts or persons is ruled out as well. 

  

 

  

 

Legal notes 

The graphs and texts of these instructions were carefully prepared. We cannot be held 
liable for any errors and their potential consequences! Subject to technical modifications 
to the product and to these instructions! These instructions include copyrighted 
information. All rights reserved! The listed product or brand names are trademarks of the 
respective owners. 

  

Summary of Contents for PAN 7040






















Reviews: