www.heinner.com 240W, 50/60Hz, 220-240V
7
V.
ASSEMBLING
Wash the parts before first use. Ensure that the compression silicone and silicone ring are
assembled properly.
STEP 1
Firmly insert the compression silicone into the slot below the pulp spout.
Note I The Juicer may leak if not assembled properly.
STEP 2
Place the juicing screw into the strainer. Turn and press down on it until it clicks into place.
Note I The juicing screw needs to be locked in place in order to close the drum lid.
STEP 3
Assemble the strainer into the rotation wiper then place this assembly in to the juicing bowl
ensuring the red dot • on the strainer is aligned with the red dot • on the juicing bowl.
STEP 4
Place the drum lid on to the juicing bowl aligning the red dot• on the drum lid with t
he red
dot• on the juicing bowl. Turn clockwise to close, aligning the red dot• on the
drum lid with
the close mark.
