www.heinner.com 240W, 50/60Hz, 220-240V
17
4. Remove the juicing screw, strainer and rotation wiper unit from the juicing bowl. Clean
with provided brush.
Immediately clean the juicer after each use. If remaining residue in the juicer dries up, it can
make disassembling and clean-up difficult. The excess build up can cause poor performance
in future uses.
•
For easier disassembly, place the top-set in the sink and run the water through from
the top of the top-set.
•
Thoroughly dry the bottom of the juicing screw where it connects to the metal cylinder
shaft on the base.
5. Place the juicing bowl under running water and unplug the compression silicone to clean
the pulp spout.
Soak the juicing bowl in a solution of warm water with baking soda or little bit of bleach to
clean the excess build up.