HEIDENHAIN TNC 426, User Manual

Page: 478 / 502

452 13 Tables and Overviews
13.1 Gener
a
l User P
a
ra
met
e
rs
Radius measurement with the TT 130 touch
probe: Probing direction MP6505.0 (traverse range 1) to 6505.2 (traverse range 3)
Positive probing direction in the angle reference axis (0° axis): 0
Positive probing direction in the +90° axis: 1
Negative probing direction in the angle reference axis (0° axis): 2
Negative probing direction in the +90° axis: 3
Probing feed rate for second measurement
with TT 120, stylus shape, corrections in
TOOL.T MP6507
Calculate feed rate for second measurement with TT 130,
with constant tolerance:
+0
Calculate feed rate for second measurement with TT 130,
with variable tolerance:
+1
Constant feed rate for second measurement with TT 130: +2
Maximum permissible measuring error
with TT 130 during measurement with
rotating tool
Required for calculating the probing feed rate in
connection with MP6570
MP6510
0.001
to 0.999 [mm] (recommended input value: 0.005 mm)
Feed rate for probing a stationary tool with
the TT 130 MP6520
1
to 3 000 [mm/min]
Radius measurement with the TT 130:
Distance from lower edge of tool to upper
edge of stylus MP6530.0 (traverse range 1) to MP6530.2 (traverse range 3)
0.001
to 99.9999 [mm]
Set-up clearance in the tool axis above the
stylus of the TT 130 for pre-positioning MP6540.0
0.001
to 30 000.000 [mm]
Clearance zone in the machining plane
around the stylus of the TT 130 for pre-
positioning MP6540.1
0.001
to 30 000.000 [mm]
Rapid traverse for TT 130 in the probe cycle MP6550
10
to 10 000 [mm/min]
M function for spindle orientation when
measuring individual teeth MP6560
0
to 999
Measuring rotating tools: Permissible
rotational speed at the circumference of the
milling tool
Required for calculating rpm and probe feed
rate
MP6570
1.000
to 120.000 [m/min]
Measuring rotating tools: Permissible
rotational rpm MP6572
0.000
to 1 000.000 [rpm]
If you enter 0, the speed is limited to 1000 rpm
3-D touch probes and digitizing