HEIDENHAIN TNC 426, User Manual

Page: 398 / 502

372 10 Programming: Q Parameters
1
0
.8 A
d
ditional F
unctions
The following functions allow you to include the following additional
information in the protocol log file:
Code word Function
CALL_PATH Gives the path for the NC program where you will
find the FN16 function. Example: “Measuring
program: %S”,CALL_PATH;
M_CLOSE Closes the file to which you are writing with FN16.
Example: M_CLOSE;
L_ENGLISH Output text only for English conversational language
L_GERMAN Output text only for German conversational
language
L_CZECH Output text only for Czech conversational language
L_FRENCH Output text only for French conversational language
L_ITALIAN Output text only for Italian conversational language
L_SPANISH Output text only for Spanish conversational
language
L_SWEDISH Output text only for Swedish conversational
language
L_DANISH Output text only for Danish conversational language
L_FINNISH Output text only for Finnish conversational language
L_DUTCH Output text only for Dutch conversational language
L_POLISH Output text only for Polish conversational language
L_HUNGARIA Output text only for Hungarian conversational
language
L_ALL Output text independent of the conversational
language
HOUR Number of hours from the real-time clock
MIN Number of minutes from the real-time clock
SEC Number of seconds from the real-time clock
DAY Day from the real-time clock
MONTH Month as a number from the real-time clock
STR_MONTH Month as a string abbreviation from the real-time
clock
YEAR2 Two-digit year from the real-time clock
YEAR4 Four-digit year from the real-time clock