HEIDENHAIN TNC 426 User Manual Download Page 44

Page: 44 / 502

2 Manual Operation and Setup

2.2 Mo

ving the Mac

ine Ax

2.2 Moving the Machine Axes

Note

To traverse with the machine axis direction
buttons:

Select the Manual Operation mode.

Press the machine axis-direction button and hold it as
long as you wish the axis to move, or

Move the axis continuously: Press and hold the
machine axis direction button, then press the
machine START button

To stop the axis, press the machine STOP button.

You can move several axes at a time with these two methods. You can
change the feed rate at which the axes are traversed with the F soft
key, see “Spindle Speed S, Feed Rate F and Miscellaneous Functions
M,” page 21.

Traversing with the machine axis direction buttons is a
machine-dependent function. The machine tool manual
provides further information.

and

Summary of Contents for TNC 426























































































































































































































































































































































































































































































































Search results

Summary of Contents for TNC 426

Reviews:

Related manuals for TNC 426

Brands by name

Popular brands

HEIDENHAIN TNC 426, User Manual

Search results

Summary of Contents for TNC 426

Reviews:

Related manuals for TNC 426

Brands by name

Popular brands