HEIDENHAIN TNC 426, User Manual

Page: 441 / 502

HEIDENHAIN TNC 426, TNC 430 415
1
1
.6 Optional Bloc
k Skip
11.6 Optional Block Skip
Function
In a test run or program run, the TNC can skip over blocks that begin
with a slash “/”:
U
To run or test the program without the blocks
preceded by a slash, set the soft key to ON.
U
To run or test the program with the blocks preceded
by a slash, set the soft key to OFF.
This function does not work for TOOL DEF blocks.
After a power interruption the TNC returns to the most
recently selected setting.