Heatmor 200 SSP, User Manual

Page: 19 / 80

14
chaPter 6
7”
BASE: OUTDOOR FURNACE SITS ON THIS PAD
Hole for Plumbing
67.5”
18”
9”
12”
OUTDOOR FURNACE SITS HERE
GROUND
LEVEL
UNDERGROUND LINES
200 ssP PaD sPeciFicatiOns
The actual pad size is 36” x 67.5”. This gives
approximately 1” extra on all sides of furnace.
CAUTION: Do not exceed this length measurement.
Width can be wider if desired.
The internal hopper opening is 43” above ground or
base of furnace.
If patio stones or a separate cement pad are put
around the cement pad for the Heatmor
TM
, they
should nOt be attached to main base pad of
furnace.
It is recommended to make the pad 4” thick and use
steel mesh or R-bar in pad for strength.
INTERNAL
HOPPER
DOOR
36”
SIDE VIEW
OUTDOOR FURNACE SITS HERE
FOUR INCH GRAVEL BASE
CEMENT BASE