19
Heat & Glo •
PHFR-PRIMO-48, PHFR-PRIMO-60, PHSI-PRIMO
Instructions • 2560-970 Rev. D • 2/19
WARNING! Risk of Fire!
DO NOT block passive heat
registers! Overheating of appliance and combustible
materials will occur.
Finishing Instructions - Front Discharge
1. Apply wall sheathing material up to 1/2 inch thick up to
the edge of the plenum. See Figure 6.21.
Figure 6.21 Wall Sheathing Installed
NO WALL SHEATHING MATERIAL BEYOND THIS LINE
NO WALL SHEATHING MATERIAL BEYOND THIS LINE
2. Install trim kit (PHTRIM-PRIMO-48 or PHTRIM-
PRIMO-60) as instructed.
3. Continue to Wiring Section.
WARNING! Risk of Overheating! DO NOT
apply wall
sheathing past outside edge of plenum. Overheating of
appliance and combustible materials will occur.
