38
RAFTERS
Flush
in corner
Flush
in corner
Place two rafter-halves on floor and flush base ends (with nub) in the corners of 10' wall.
Place
RL
under peak of rafters as a temporary support.
Secure gusset to rafters with 2" nails following the pattern shown
(FIg. A)
.
Place two rafter-halves on floor and flush base ends (with nub) in the corners of 10' wall
, as shown in step 1.
Flush rafters at peak. Place
RL
under peak of rafters as a temporary support.
Secure gusset to rafters with 2" nails following the pattern shown
(FIg. A)
.
Build (2) rafter assemblies with(1) gusset (Fig. B).
Depending on your shed size, build 4 or 6 rafter assemblies with (2) gussets (Fig. C).
BEGIN
1
2
3
FINISH
Your rafters are now assembled.
Remove RL and screws from floor.
2" (5,1 cm)
PARTS REQUIRED:
x168
x120
x16
x12
x14
x10
6 x 24" (15,2 x 60,9 cm)
10x14'
10x10'
Flip over rafter assembly and fasten second gusset to other side with 2" nails
(FIg. C)
.
Temporary
Support RL
Flush at peak
SET ASIDE THESE TWO RAFTER ASSEMBLIES.
Fig. B -
Build 2
Fig. C -
Build 4 or 6
Fig. A
1/4"
(1,9 cm)
1/4"
(1,9 cm)
Flush
Temporary Support
2 x 4 x 24" (5,1 x 10,2 x 61 cm)
x1 RL
Pre-assembled
120"
(304,8 cm)
Fit base of rafters in corners
of 10' wall.
