13
2010/4/7 Ver1.1+V1.2
3-5 Centering The Belt
After installing and
leveling
the treadmill, check the belt to ensure that it is tracking properly.
First, plug the power cord into an appropriate
dedicated
outlet. Then, turn the treadmill ON.
Have one person stand on the
anti-slip pads
on either side of the treadmill frame. Do not stand
on the running belt at this time. Press the QUICK START key, and increase the speed to
4.0
mph (6.4kph).
If the striding belt moves to the right while it is running:
Turn
the right tension bolt a quarter-turn clockwise,
and then turn the left tension bolt
a
quarter-turn counter-clockwise. See the illustration below. Allow the treadmill to run for 5
minutes.
This action should set the striding belt tracking back to center of the roller, if not, repeat
process.
If the striding belt moves to the left while it is running:
Turn the left tension bolt a quarter-turn clockwise and then turn the right tension bolt a
quarter-turn counter-clockwise.
Allow the treadmill to run for 5 minutes.
This action should set
the striding belt tracking back to center of the roller, if not, repeat process.
NOTE:
Do not exceed one full turn of the adjusting screws in either direction. If, after one full
turn , the belt does not track properly.
Check with a qualified service company.