18
2010/4/7 Ver1.1+V1.2
4-2 Assembly Steps
Two people should finish the assembly steps.
(Caution!! Please follow exactly the assemly steps below to aviod injury.)
1.
First, loosen the Philips Screws (altogether 10cpcs) which fix the upper motor cover on the Frame(B), remove the
upper motor cover. Pull out the control wire with the guide threads attached in the left and right upright, and
then feed it into the side hole of the left and right upright.
then fix slightly Upright(C,D) on the frame with
screw(a). Tighten Hex screw(g), and then tighen screw(a).
At last put back the upper motor cover and tighten it
with Philips Screw (h).
Note: 1.When assembling the Upright, one person should hold the Upright to prevent it from falling.
2. Before installing the upper motor cover, be sure that there are no tools or screws droped into the frame.
TV Cable(Lower)
AV Extension Wire(Lower)
Control Wire Port
Upper Motor Cover
Philips Screw
Philips Screw
Running Belt
Philips Screw
Philips Screw
Frame Assembly
Hex Screw
Washer
Spring Washer