37
2010/4/7 Ver1.1+V1.2
STEP10.
Adjust VOLUME
▲▼
; select CHANNEL
▲▼
STEP11.
If TV signal is from cable, press
key to watch cable TV (Photo below)
※
In analogue TV, if TV channels are lacking or screen is not responsive when touch, please
check signal strength should be 60-75 dBuV up to turner board. If signal strength is correct,
please rescan again
(STEP1)
. If problems still persist, please contact with your dealer or local
TV company.
◎
Remarks
In set-up, you can switch unit between km/h and ml/h or check software/hardware information.
STEP1.
Hold up
key for 10 sec, then the next screen pop up (below)