HDMI Sirius-PJ2, Field Service Manual

Page: 114 / 172

This is a failure in opening the serial port.
Check the Serial Port Number.
Make sure that there is no other application using the same Serial Port.
"TIME OUT (Comm Close Error) ! ", "Comm Close Error"
This is a failure in closing the serial port.
Confirm if there is any application that occupies the serial port.
In case it occurs 2 or 3 times consecutively, reboot the PC.
"File format error", "Address error"
The data format of the file specified when executing data writing from the file is not correct.
Make sure that it is a file read in PJ X6181N/WX6181N/WU6181N.
"ACK Error!! "
Check the status of the projector, and retry.
* For instance, you may have done an operation with Power OFF, which should have been done with
Power ON.
In case it occurs 2 or 3 times consecutively, reboot the PC.
If not recovering from this error after operating the above, the projector may be in trouble.
"Model name error!! "
The target projector is not PJ X6181N/WX6181N/WU6181N.
"Model check Error (2)!! "
The current target projector is not the one executed [Adjust Start].
Restart from [Adjust Start], in case adjusting current target projector.
"Comparison error"
The data is not successfully written. Retry writing.
In case it occurs 2 or 3 times consecutively, reboot the PC.
If not recovering from this error after operating the above, the projector may be in trouble.
3. Replacement and Adjustment
112