HDMI Sirius-PJ2, Field Service Manual

Page: 77 / 172

[A]: Fixing screw
[B]: Spacer (RL2)
[C]: Handle part of the holder (RL2)
Vertical direction:
1. Loosen the RL2 fixing screw (1 position).
2. Change the spacer (RL2) thickness and adjust the shadow margin until it is vertically equalized.
Arrange the spacers so that the total number of spacers is as small as possible.
* The upper limit of the amount of spacers (thickness) in total is 2mm.
Horizontal direction:
1. Hold the handle part of the holder (RL2) by hand, and move the holder to the right and left in order
to adjust the shadow margin so that it is horizontally equalized.
2. After adjustments, fix the RL2 fixing screw (1 position).
The tightening torque shall be 0.35 ± 0.05N•m.
M1 adjustment
[A]: Fixing screw
[B]: Handle part of the holder (M1)
1. Loosen the M1 fixing screws (2 positions).
2. Grip the handle part of the holder (M1) by hand, and move the holder to the right and left in order
to adjust the shadow position both vertically and horizontally so that it is equally positioned. Make
adjustments, paying attention to the directions that M1 rotates and drops down.
3. After adjustments, fix the M1 fixing screws (2 positions).
The tightening torque shall be 0.35 ± 0.05N•m.
Shadow adjustment for each color
• Vertical shadow adjustment for G and B
Move the holder (FL1) vertically and eliminate the vertical shadow. (Equally balanced in vertical
directions)
Replacement of Optical Parts
75