HDMI Sirius-PJ2, Field Service Manual

Page: 75 / 172

[A]: Shadow in vertical direction
[B]: Shadow in vertical direction
Neutral setup position for each adjuster block
• FL1
Vertical: The state when the holder (FL) maintains the height of one (FL) T1.0 spacer and one T0.5
spacer.
Horizontal: Bosses of OPT COVER are located in the right and left holder (FL) holes, each in the
center position.
• RL2
Vertical: The state when the holder (RL2) maintains the height of one (RL2) T1.0 spacer and one
T0.5 spacer.
Horizontal: Bosses of OPT COVER are located in the right and left holder (RL2) holes, each in the
center position.
• M1
The outer edge plane of the separator base is joined with the edge plane of the holder (M1).
Operation of each adjusting part (see “Adjusting and fixing parts”)
FL adjustment
Replacement of Optical Parts
73