HDMI Sirius-PJ2, Field Service Manual

Page: 120 / 172

Cautions when connecting a DisplayPort cable
• Use a certified DisplayPort cable.
• Depending on the computer, some time may be required until the image is displayed.
• Some DisplayPort cables (commercially available) have locks.
• To disconnect the cable, press the button on the top of the cable’s connector, then pull the cable
out.
• Power can be supplied to the connecting device from the Display Port input terminal (maximum of
1.65 W); however, power will not be supplied to the computer.
• When signals from a device that uses a signal converter adapter are connected to the DisplayPort
input connector, in some cases the image may not be displayed.
• When the HDMI output of a computer is connected to the DisplayPort input connector, use a
converter (commercially available).
• When the computer has a DVI output connector, use a commercially available converter cable to
connect the computer to the projector’s HDMI 1 or HDMI 2 input connector (only digital video
signals can be input). Also, connect the computer’s audio output to the projector’s BNC audio input
connector. In this case, switch the HDMI1 or HDMI2 setting in the on-screen menu’s audio
selection on the projector to [BNC].
• To connect the computer’s DVI output connector to the projector’s DisplayPort input connector, use
a commercially available converter.
[A]: HDMI 1 IN
[B]: HDMI 2 IN
[C]: AUDIO IN
4. System Maintenance
118