CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)
61
Position of X-Y coordinates at the machine table:
Function adjustment:
This function is only displayed if the corresponding parameter
is enabled!
Parameter: Adjustment X-Y = 1
This function provides the input of a corrective value (without password protection) to the
parameters X offset and Y offset.
This adjustment option can be used in the case of
– change of chucks (concentricity defect)
– adjustment of beveled work pieces (bending error).
Touch key EDIT
A change of offset parameters is only possible after a password
input!
Password level: From level 1: Level 1 is for tool setters
Touch key EXIT
The menu „Setup CNC“ is quit.
4 Function
4.7 Menu SETUP CNC