CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)
37
Touch key STEP
(Parameter „Reweld“ = 0/1)
Using „STEP“ the single step / rewelding is initiated.
The function is engaged if the display looks green!
Note:
The STEP mode must one time be started with the push button
„START“.
The door must be closed because during execution of
a single step the door is automatically locked to avoid
any danger!
The STEP function can be cancelled by a press on the
push button „STOP“ and subsequent pressing the
touch key „CANCEL“.
Touch key Pos XY
Using „Pos XY“ you can scroll through the program line by line.
Using „Pos XY“ you can move to a X-Y coordinate in an individual
step (Line).
Using „Pos XY“ releases and carries out subsequent positioning
commands.
During execution, the door is locked. Only after termination of
movement, the door lock is released again.
Destinations are only X and Y coordinates!
Z coordinates remain unregarded!
4 Function
4.4 Menu AUTOMATIC