manualshive.com logo in svg

HBS CPW 0604, Operating Manual, Page: 43 / 180

Share
Download
HBS CPW 0604 Operating Manual Download Page 43

CPW 0604  BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)

43

4.5

Menu MANUAL / CONTACT

In this menu, all functions can be actuated manually.

Note the instructions for qualified operators (see chapter 1).
The operator must have read and understood the operating
manual.

In this menu, the contact signal for the related welding job (program) is set.

The following parameters of the currently called program are
used:
- Plunge in
- Min. stud length (only display, to the right above)
- Delay before welding
- Delay after welding
- Shielding gas.

Overview of displays:

– Display of program name of the currently selected program.

– Display of the shortest stud length of the selected program.

– Software potentiometer: Variable speed preselection for manual mode

(100 % - 10 %).

– Display of preseted speed in m/min.

4 Function

4.5 Menu MANUAL / CONTACT

Summary of Contents for CPW 0604





















































































































































































Reviews:

No comments