38
CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)
Touch key WELD
(Parameter „Reweld“ = 1)
Using „WELD“ an individual weld is carried out at a predefined
position.
Touch key P-WELD
(Parameter „Reweld“ = 2)
Using „P-WELD“ the graphical Reweld editor is called up
The Reweld Editor
Stud positions of the current program can be displayed here graphically.
Example:
Display after executing with the “AUTO“ or „LINE>“ touch key until end of the program.
Touch key CLS
With „CLS“, the already set and displayed stud image is deleted and
the program is reset to line start.
4 Function
4.4 Menu AUTOMATIC