50
CPW 0604 BA CPW 0604 Issue 10.09.13 (From Software-Release 0.0.1.31)
4.5.4
Calibration of Contact Position Z
The welding head is positioned to the contact signal with the touch keys Z+ and Z-.
Move the Z axis as described in section 4.5.2 to contact with work piece, see
figure to the right!
In the case of contact with work piece the condition display „Contact signal“
changes the colour from yellow to green.
Touch key ENTER
Using the touch key „ENTER“ the current Z position is accepted and
saved as new contact position Z.
Figure: Contact position
After calibration, move the Z axis away from work piece in home
position!
4 Function
4.5 Menu MANUAL / CONTACT