HBM PX401, Operating Manual

Page: 39 / 552

Model overview, scope of supply, accessories
PMX
A4354-2.2 HBM: public
39
Software driver
The PMX command set and a dotNET-API and a
LabView driver are available to create customer-specific
interfaces. This allows your own operating concepts and
the inclusion in existing software solutions to be realized.
With the PMX-LabView driver, PMX can be integrated via
Virtual Instruments (VI) in the software of National
Instruments.
The following functions are supported by the drivers in
PMX:
Function Description
Decice Scan Scan Ethernet network
Measurement configuration Set sample rate, filter, zero
Sensor configuration Set scaling (2‐point) or via TEDS
Analog In DAQ and calculated channels
(streaming) Read all measuring values and time
stamps from sensors, channels
Status information (diagnostic) Read each channel‐ and device status
Peak values Read or clear peak values
Limit switches Read or set limit switches
Analog Out (direct setting) Read or set analog outputs (10 V)
Analog Out (configuration) Set source, scaling
Digital In DAQ Read digital outputs and set (high/low)
Digital Out DAQ (direct setting) Read digital outputs and set (high/low)
CAN DAQ (via CODESYS / calculated
channels) Read calculated channels with CAN
signals
Parameter sets Read and select parameter sets