HBM PX401, Operating Manual

Page: 341 / 552

CODESYS‐V3 Soft PLC (WGX001 only)
PMX
A4354-2.2 HBM: public
341
Function: SetParameterSet
Set the current parameterset. The current parameterset
is available via the HBM PMX CODESYS IO. The param­
etersets have to be configured via web interface before­
hand. This function returns a handle which can be
queried via the isFinished function. It is nevertheless pos­
sible that the parameter switch is not finished on the com­
pletion of this call as this function only triggers the start of
the parameterset switching. Use systemevent where sys­
temeventnr = 2000 to get a trigger if parameter set
switching was successful.
Name Data type Inherited
from Adress Initial
value Comment
setParameterSet DINT
paremeternr DINT The parameterof
the desires para­
meterset
Function: SetResetPeak
Reset the peak value. This function should be called two
times for a full reset cycle.
Name Data type Inherited
from Adress Initial
value Comment
setResetPeak DINT
slot DINT Slot of peak
value (valid 1-4
depending on
hardware).