HBM PX401, Operating Manual

Page: 222 / 552

Internal calculation channels
222
A4354-2.2 HBM: public
PMX
13.2.4.10Timer
Function Either single shot or continuously running timer. When
elapsed, a flag is set to high level.
Maximum interval 100,000 s. Resolution = 1/Calculation Rate,
see above.
Inputs Run (digital):
In single shot mode, a low to high transition starts the timer. A
high to low transition does not stop the timer.
In continuous mode, a high level starts the timer. A low level
stops the timer immediately.
Outputs Elapse flag: Is set to high when the timer elapses
In single shot mode , the flag gets high for one calculation
cycle when the parameter Pulse Length equals 0. Otherwise
the flag gets high until the next timer start.
In continuous mode , the flag gets high for the time defined
with parameter Pulse Length.
Time [s]: The current timer value.
While the timer is stopped, Interval is output.