HBK DSE, Operating Manual

Page: 81 / 204

79
DSE
INDUSTRIAL ETHERNET
Command
[String] Response
[U32] Function
idle 0x656c6469 Response to idle command.
ok__ 0x5f5f6b6f Command was executed successfully.
ongo 0x6f676e6f The procedure was started and is still
running, e.g. after calz.
__E1 0x31455f5f Error 1.
__E2 0x32455f5f Error 2.
__E3 0x33455f5f Error 3 – Error while Calibration occurred.
__E4 0x34455f5f Error 4.
Error flags when reading or writing the object dictionary
Bit Flag
[hex] Function
0 0x01 Access error. Attempt to write to a read-only object for example.
1 0x02 Format error. Unsupported data type for example.
2 0x04 Not found. Object does not exist.
3 0x08 Object too large, the value does not fit in the reply field (e.g. in the
case of fields).
4 0x10 The value was truncated. The value is valid, but had to be truncated
to fit into the reply field (e.g. in the case of strings).
Object 0x6012/01, supported flags
Bit Flag
[hex] Function
0 0x0001 Group error display.
4 0x0010 Scale is moving.
6 0x0040 The tare value was set manually.
7 0x0080 Always 1, because output weight is always net.
8-9 Scale interval:
Value 00b: Interval 1
Value 01b: Interval 2
Value 10b: Interval 3