HBK DSE, Operating Manual

Page: 44 / 204

DSE
WEB INTERFACE
42
Opens the navigation if
the screen is small;
otherwise irrelevant
Program help
Type and name of the device
Notice that changes have not yet
been permanently saved
Processor
load
Status LED
Language selection
Find device
Name of parameter set
Heartbeat
Fig. 7.2 First status line at top of window
Status, may be one of
four states
Measurement value
stop detected
Indicates whether
the measurement
value is 0
Shows the scale's
weighing range
Fig. 7.3 Status area below first line at top of window
Icon Status Explanation
First line
Menu Displayed only on a small screen, to open the menu.
Not shown if the screen is large enough.
Parameter set Shows the name of the active parameter set, and
whether all settings are stored in it (icon on left) or
not (icon on right). In this case, an exclamation mark
is additionally displayed inside the circle next to the
Parameter Sets menu.
Processor
load Indicates the load on the processor in percent.
Heartbeat The pulsing of the icon indicates that communication
has been established with the DSE.
Status Corresponds to the system LED of the DSE.