Hawk Senator S24S, Handbook

Page: 61 / 176

OPERATION
6
61
Senator S24S
01/2019 - Senator S24S Radar Manual v1.00 en
Measurement data includes different measurement types (level, distance, volume, ullage
volume, mass etc.). Some measurement types will only be available in Normal mode if you
entered the correct parameters in Program mode. Normal mode shows abbreviations of
measurement types if the measurement page is configured to show more than one
measurement value. For a list of the abbreviations used in Normal mode, refer to the table that
follows:
Abbreviations of measurement types used in Normal mode
Current output and LCD display settings Current output and LCD display settings Current output and LCD display settings Current output and LCD display settings
When you do the Standard setup
Standard setup Standard setup Standard setup procedure, the measurement value on the first measurement
page of the LCD display (in Normal mode) automatically uses settings with the same parameters
and values as the current output settings (measurement variable, 0% range and 100% range).
The first measurement page shows "one value and bar" by default. If you must show one or more
measurement values that are different to the transmitted output signal, change the settings in
the C6.4 1st Meas. Page and C6.5 2nd Meas. Page menus. For more data, refer to Function
description on page 77
–
table C. Full Setup menu (C6 Display).
Measurement type Abbreviation
Distance Dis
Level Lvl
Reflection Ref
Sensor value SV
Volume Vol
Ullage volume Ull
Mass M
Ullage mass UllM
Linearized distance Ldis or Distance Lin.
Linearized level LLvl or Level Lin.
www.hawkmeasurement.com