INSTALLATION
3
35
Senator S24S
01/2019 - Senator S24S Radar Manual v1.00 en
Procedure 1: How to attach an antenna extension
•
Attach the antenna extensions
1
below the flange. Use a 36 mm open-end wrench to tighten
each antenna extension. Make sure that the antenna extensions
1
fully engaged.
•
Tighten the locking screw
3
on each antenna extension with a 3 mm Allen wrench.
•
Attach the antenna
2
. Make sure the antenna is fully engaged.
•
Tighten the locking screw
3
on each antenna extension with a 3 mm Allen wrench.
•
Use a 3 mm Allen wrench to tighten the locking screws
3
.
i
If the antenna extension is supplied with the device, it is not necessary to change the device
settings. End of the procedure.
•
If the antenna extension is supplied after delivery of the device, it is necessary to change the
device settings. Do the procedure that follows.
Procedure 2: Device settings for a device with an antenna extension
•
Push 2 × [>>>>], 2 × [
] and [>>>>] to go to menu item Login
Login
Login
Login.
•
Enter the hexadecimal password (default password: 0058).
•
Push 2 × [
^
^
^
^
], 2 × [
], 2 × [>>>>], 5 × [
] and [>>>>] to go to menu item C1.8 Antenna Extension
C1.8 Antenna Extension
C1.8 Antenna Extension
C1.8 Antenna Extension.
•
Push [>>>>] to change the value. Push [>>>>] to change the position of the cursor. Push [
] to
decrease the value or [
] to increase the value.
i
Each antenna extension is 105 mm long. If the device has 3 antenna extensions, they have a
total length of 315 mm. In this example, enter the value "315".
•
If you changed the antenna extension value, also change the blocking distance value. Push
[
^
^
^
^
], 3 × [
], [>>>>] to go to menu item C1.5 Blocking Distance
C1.5 Blocking Distance
C1.5 Blocking Distance
C1.5 Blocking Distance.
•
Push [>>>>] to change the value. Push [>>>>] to change the position of the cursor. Push [
] to
decrease the value or [
] to increase the value. Minimum recommended blocking distance =
antenna (antenna extension length × number of extensions) +0.3 m / 12
¨
.
•
Push 3 × [
^
^
^
^
] to go back to the "Save Configuration?" screen.
•
Push [
] or [
] to set the screen to Yes
Yes
Yes
Yes and push [
^
^
^
^
] to store and use the changed settings.
i
End of the procedure.
Equipment needed (not supplied):
•
3 mm Allen wrench
Drop antenna
–
antenna extensions
Figure 3-15: Drop antenna
–
how to attach antenna extensions
CAUTION!
Drop antenna:
Drop antenna:
Drop antenna:
Drop antenna: Make sure that there are not more than 5 antenna extensions attached to a device
with a Drop antenna. If there are more than 5 antenna extensions, the device will not measure
correctly.
Make sure that you put an O-ring
4
into the groove at the top of each antenna extension.
www.hawkmeasurement.com
Summary of Contents for Senator S24S
Page 173: ...NOTES 11 173 Senator S24S 01 2019 Senator S24S Radar Manual v1 00 en www hawkmeasurement com...
Page 174: ...11 NOTES 174 Senator S24S 01 2019 Senator S24S Radar Manual v1 00 en www hawkmeasurement com...
Page 175: ...NOTES 11 175 Senator S24S 01 2019 Senator S24S Radar Manual v1 00 en www hawkmeasurement com...
