Hawk Senator S24S, Handbook

Page: 11 / 176

SAFETY INSTRUCTIONS
1
11
Senator S24S
01/2019 - Senator S24S Radar Manual v1.00 en
1.4.2 U.S.A. and Canada
This level transmitter is approved to be used outside metallic tanks. If you use the device in the
open air, read the device nameplate to make sure that the device can be used for your
application. Only the antennas that follow are permitted for open-air applications:
LPR (Level Probing Radar) LPR (Level Probing Radar) LPR (Level Probing Radar) LPR (Level Probing Radar) devices measure level in the open air or in a closed space (a metallic
tank etc.). TLPR (Tank Level Probing Radar)
TLPR (Tank Level Probing Radar) TLPR (Tank Level Probing Radar) TLPR (Tank Level Probing Radar) devices measure level in a closed space only.
For more data about the order code, refer to Order code on page 158
.
Antenna type Order code
316L / DN80 (3
¨
) Metallic Horn S24Sxxxxxxxxxxxxx4xxx...
316L / DN100 (4
¨
) Metallic Horn S24Sxxxxxxxxxxxxx5xxx...
316L / DN150 (6
¨
) Metallic Horn S24Sxxxxxxxxxxxxx6xxx...
316L / DN200 (8
¨
) Metallic Horn S24Sxxxxxxxxxxxxx7xxx...
PP / DN80 (3
¨
) Drop S24SxxxxxxxxxxxxxAxxx...
PP / DN100 (4
¨
) Drop S24SxxxxxxxxxxxxxBxxx...
PP / DN150 (6
¨
) Drop S24SxxxxxxxxxxxxxCxxx...
PTFE / DN80 (3
¨
) Drop S24SxxxxxxxxxxxxxExxx...
PTFE / DN100 (4
¨
) Drop S24SxxxxxxxxxxxxxFxxx...
PTFE / DN150 (6
¨
) Drop S24SxxxxxxxxxxxxxGxxx...
LEGAL NOTICE!
FCC
FCC FCC
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference which may cause un-
desired operation.
Changes or modifications made to this equipment not expressly approved by the manufacturer
may void the FCC authorizations to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
www.hawkmeasurement.com