Haulotte Group xlb-4725a, Operator'S Maintenance Manual, Page: 66 / 118

HAULOTTE GROUP 4 EQUIPMENT MAINTENANCE
66
TABLE 4-3 ERROR CODE DEFINITIONS
ERROR MESSAGE ERROR DEFINITION TO SIMULATE ERROR TO CLEAR ERROR COMMENTS
143 OPEN CIRCUIT
(FWS C32)
A load of less than 70mA
was detected when
(FWS C32) circuit was
energized Disconnect a wire from
(FWS C32) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
144 SHORTED CIRCUIT
(FWS C32)
Excessive load was
detected when (FWS
C32) circuit was
energized Use a piece of wire to
short the (FWS C32) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
145 OPEN CIRCUIT
(FWS C33)
A load of less than 70mA
was detected when
(FWS C33) circuit was
energized Disconnect a wire from
(FWS C33) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
146 SHORTED CIRCUIT
(FWS C33)
Excessive load was
detected when (FWS
C33) circuit was
energized Use a piece of wire to
short the (FWS C33) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
147 OPEN CIRCUIT
(FWS C34)
A load of less than 70mA
was detected when
(FWS C34) circuit was
energized Disconnect a wire from
(FWS C34) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
148 SHORTED CIRCUIT
(FWS C34)
Excessive load was
detected when (FWS
C34) circuit was
energized Use a piece of wire to
short the (FWS C34) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
149 OPEN CIRCUIT
(FWS R2)
A load of less than 70mA
was detected when
(FWS R2) circuit was
energized Disconnect a wire from
(FWS R2) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
150 SHORTED CIRCUIT
(FWS R2)
Excessive load was
detected when (FWS R2)
circuit was energized Use a piece of wire to
short the (FWS R2) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
151 OPEN CIRCUIT
(FWS GEN G1)
A load of less than 70mA
was detected when
(FWS Gen G1) circuit
was energized Disconnect a wire from
(FWS Gen G1) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
152 SHORTED CIRCUIT
(FWS GEN G1)
Excessive load was
detected when (FWS
Gen G1) circuit was
energized Use a piece of wire to
short the (FWS Gen G1)
coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
153 OPEN CIRCUIT
(FWS CON 24V)
A load of less than 70mA
was detected when
(FWS Con 24V) circuit
was energized Disconnect a wire from
(FWS Con 24V) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
154 SHORTED CIRCUIT
(FWS CON 24V)
Excessive load was
detected when (FWS
Con 24V) circuit was
energized Use a piece of wire to
short the (FWS Con 24V)
coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
155 OPEN CIRCUIT
(FWS SPARE 1)
A load of less than 70mA
was detected when
(FWS Spare 1) circuit
was energized Disconnect a wire from
(FWS Spare 1) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
156 SHORTED CIRCUIT
(FWS SPARE 1)
Excessive load was
detected when (FWS
Spare 1) circuit was
energized Use a piece of wire to
short the (FWS Spare 1)
coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only
157 OPEN CIRCUIT
(FWS SPARE 2)
A load of less than 70mA
was detected when
(FWS Spare 2) circuit
was energized Disconnect a wire from
(FWS Spare 2) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WS
option only