Haulotte Group xlb-4725a, Operator'S Maintenance Manual, Page: 63 / 118

HAULOTTE GROUP 4 EQUIPMENT MAINTENANCE
63
TABLE 4-3 ERROR CODE DEFINITIONS
ERROR MESSAGE ERROR DEFINITION TO SIMULATE ERROR TO CLEAR ERROR COMMENTS
088 SHORTED CIRCUIT
TURN RIGHT (C23)
Excessive load was
detected when Turn
Right (C23) circuit was
energized Use a piece of wire to
short the Turn Right
(C23) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
089 OPEN CIRCUIT
FORWARD 1 (C24)
A load of less than 70mA
was detected when
Forward 1 (C24) circuit
was energized Disconnect a wire from
Forward 1 (C24) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
090 SHORTED CIRCUIT
FORWARD 1 (C24)
Excessive load was
detected when Forward 1
(C24) circuit was
energized Use a piece of wire to
short the Forward 1
(C24) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
091 OPEN CIRCUIT
REVERSE 1 (C25)
A load of less than 70mA
was detected when
Reverse 1 (C25) circuit
was energized Disconnect a wire from
Reverse 1 (C25) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
092 SHORTED CIRCUIT
REVERSE 1 (C25)
Excessive load was
detected when Reverse
1 (C25) circuit was
energized Use a piece of wire to
short the Reverse 1
(C25) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
093 OPEN CIRCUIT
FORWARD 2 (C27)
A load of less than 70mA
was detected when
Forward 2 (C27) circuit
was energized Disconnect a wire from
Forward 2 (C27) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
094 SHORTED CIRCUIT
FORWARD 2 (C27)
Excessive load was
detected when Forward 2
(C27) circuit was
energized Use a piece of wire to
short the Forward 2
(C27) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
095 OPEN CIRCUIT
REVERSE 2 (C28)
A load of less than 70mA
was detected when
Reverse 2 (C28) circuit
was energized Disconnect a wire from
Reverse 2 (C28) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
096 SHORTED CIRCUIT
REVERSE 2 (C28)
Excessive load was
detected when Reverse
2 (C28) circuit was
energized Use a piece of wire to
short the Reverse 2
(C28) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
097 OPEN CIRCUIT
TORQUE H/L (C29)
A load of less than 70mA
was detected when
Torque H/L (C29) circuit
was energized Disconnect a wire from
Torque H/L (C29) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
098 SHORTED CIRCUIT
TORQUE H/L (C29)
Excessive load was
detected when Torque
H/L (C29) circuit was
energized Use a piece of wire to
short the Torque H/L
(C29) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
099 OPEN CIRCUIT
TORQUE H/L (C30)
A load of less than 70mA
was detected when
Torque H/L (C30) circuit
was energized Disconnect a wire from
Torque H/L (C30) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
100 SHORTED CIRCUIT
TORQUE H/L (C30)
Excessive load was
detected when Torque
H/L (C30) circuit was
energized Use a piece of wire to
short the Torque H/L
(C30) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
101 OPEN CIRCUIT
TORQUE H/L (C31)
A load of less than 70mA
was detected when
Torque H/L (C31) circuit
was energized Disconnect a wire from
Torque H/L (C31) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only
102 SHORTED CIRCUIT
TORQUE H/L (C31)
Excessive load was
detected when Torque
H/L (C31) circuit was
energized Use a piece of wire to
short the Torque H/L
(C31) coil This is a latched error.
Power must be cycled to
clear error Checked only at
power up
Machines with 4WD
option only