Haulotte Group xlb-4725a, Operator'S Maintenance Manual, Page: 53 / 118

HAULOTTE GROUP 4 EQUIPMENT MAINTENANCE
53
ADDITIONAL SERVICE INFORMATION
Seals on hydraulic cylinders should be replaced every five years or as indicated by aerial work
platform performance.
All service checks should be performed on an aerial work platform that has been stored without use
for a period exceeding thirty (30) days.
Check for air in the hydraulic system if the aerial work platform has been stored without use for a
period exceeding thirty (30) days, or if the aerial work platform was stored without use during a
seasonal climate change. Air trapped in the hydraulic system will affect aerial work platform
performance. Follow procedures for bleeding air from the hydraulic system, found in the “Cylinder
Replacement” section of this manual.
Owners and lessors should complete a full inspection of all components and perform a test of all
functions, including brake functions, before commissioning or reselling the aerial work platform.
Always repair or replace all damaged or malfunctioning components before commissioning or
reselling an aerial work platform.
When a change in ownership occurs, it is the responsibility of the seller to provide the new owner with
all manuals for the aerial work platform. It is the responsibility of the buyer to notify the manufacturer
of the unit model and serial number and the name and address of the new owner within sixty (60)
days of the purchase.
Use the service checklists found at the back of this manual to record all service checks as well as any
maintenance, repairs or alterations performed on the aerial work platform.
Records of frequent safety checks need not be made. However, where a safety hazard is found, it
shall be reported in writing to the owner of the aerial work platform, and a record of any corrective
action shall be maintained for five years or as required by the authority having jurisdiction.