Haulotte Group STAR 10NG Operator'S Manual Download Page 60

Page: 60 / 104

24203 3207 0

E 07 07

- Operating principle

Telescopic masts

2.8 - MACHINE BRAKING

If electric power is cut off, the machine is automatically braked..

Performance levels can be reduced in case of :

• Descending a bumpy ramp.

• Worn tyres.

• Damp or muddy ground.

2.9 - WHEEL MOTOR BRAKE RELEASE

Each time a translation command is made, electric power frees the brakes.

2.10 - ANTI-POTHOLE SAFETY SYSTEM

To avoid the risk of tipping over, the machine is equipped with anti-tipping devices located
under the chassis.

2.11 - ON-BOARD CHARGER

This device charges the machine's batteries.

Battery charging starts as soon as the mains supply is connected.

The machine's electric system is automatically deactivated during charging.

Summary of Contents for STAR 10NG









































































































Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands

Haulotte Group STAR 10NG, Operator'S Manual

Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands