Haulotte Group STAR 10NG Operator'S Manual Download Page 81

Page: 81 / 104

24203 3207 0

E 07 07

- Special procedure

Telescopic masts

4.1.2 - Loading by power lift truck

4.1.3 - Unloading by power lift truck

• While lifting, make sure that the load is evenly spread.

• Put down the machine.

4.1.4 - Loading by lifting

For : STAR 8 (STAR 22J) - STAR 10 (STAR 26J)

4.1.5 - Unloading by lifting

For : STAR 8 (STAR 22J)-STAR 10 (STAR 26J)

Hook the 4 slings on the 4 sling hooks.

• Ensure that the machine controls are in the OFF position.

• Use a sufficiently powerful lift truck.

• Move the forks apart.

• Place the forks in the positions indicated on the chassis.

• Place the forks well under the machine to ensure optimum

stability.

Use a lifting beam with 4 slings of sufficient strength.

Summary of Contents for STAR 10NG









































































































Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands

Haulotte Group STAR 10NG, Operator'S Manual

Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands