Haulotte Group STAR 10NG Operator'S Manual Download Page 20

Page: 20 / 104

24203 3207 0

E 07 07

Telescopic masts

- Intervenor's responsibility

4 - Operator's responsibility

The operator must read and understand this manual and the labels affixed on the machine.

The operator must inform the owner (or hirer) if the manual or any labels are missing or in bad condition,
and of any malfunction of the machine.

The operator may only operate the machine for the purpose intended by the manufacturer.

All operators must be familiar with the emergency controls and how to operate the machine in an
emergency.

The operator must stop using the machine in the event of malfunction or safety problems on the
machine or in the work area.

Only authorized and qualified operators may operate HAULOTTE® machines.

Summary of Contents for STAR 10NG









































































































Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands

Haulotte Group STAR 10NG, Operator'S Manual

Search results

Summary of Contents for STAR 10NG

Reviews:

Related manuals for STAR 10NG

Brands by name

Popular brands