Haulotte Group STAR 10NG, Operator'S Manual

Page: 80 / 104

80 24203 3207 0 E 07 07 EN
F
- Special procedure
Telescopic masts
4 - Loading and unloading
N.B.-:-W
HILE CROSSING THE RAMPS
,
DURING LOADING OR UNLOADING
HAULOTTE®
RECOMMENDS
POSITIONING THE COUNTERWEIGHT AT THE REAR
.
4.1 - PRINCIPLE
4.1.1 - Loading by ramp
N.B.-:-T
HE SLOPE OF THE RAMP IS ALWAYS GREATER THAN THE MAXIMUM AUTHORIZED SLOPE
. T
O
AUTHORISE DRIVING
:
• Lower the mast and jib.
For : STAR 6 (STAR 13)
To avoid any risk of sliding during loading, ensure that :
• The loading ramps can bear the load.
• The loading ramps are correctly fixed.
• The adhesion is sufficient.
• The machine is completely stowed.
If 2 ramps are used, ensure that the distance between them does not exceed 0,35 m (1 ft 1 in) .
If the slope is too steep, use a winch in addition to the drive.
Never place yourself below or too close to the machines during loading.
A wrong move can lead to the falling of the machine and cause serious bodily and material accidents.
N.B.-:-I
N ORDER TO PERFORM LOADING AND UNLOADING
OPERATIONS
,
THE OPERATOR CAN
:
• Disconnect the upper control unit.
• Connect the upper control unit to the chassis.