68
4000511390
E03.16
USA / GB
HT21RT O - HT21RT O SW - HT61RT O - HT21RT PRO - HT21RT PRO SW - HT61RT PRO -
HT23RTJ O - HT23RTJ O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
D
Inspection and maintenance schedule
5 - Reinforced inspection
Reinforced periodic inspection is a thorough inspection of the structure of the machine, to ensure the full
functionnality. It must occur at a frequency of 5 years or 2500 h.
This inspection is under the responsibility of the owner, and it must be conducted by a Haulotte Service technician
or qualified/authorized person.
This inspection should include the daily inspection and periodic inspection, refer to the manual for details.
Reinforced inspection
In addition to the daily inspection
program
Visual inspection with small disassembly or movement needed to reach the part. Replacement is necessary.
Proof tests. Need HAULOTTE Services® authorization. For countries where machines are not subject to controlled
periodic maintenance.
Yes
No
Correcte
d
Not
applicable
Work Platform. Floor, guardrails, access and extensions
No deterioration and visible damage
Lift assembly (jib, boom, mast, arm, turret)
No deterioration and visible damage
No abnormal gap in joints and slides
Frame, axle, steering system, stabilizers arms ...
No deterioration and visible damage
No foreign body in joints or slides
Condition of tires/tyres (wear, cutting, damage ...)
Rotation systems : orientation turret, basket and jib
No deterioration and visible damage
Slewing device screw and bolt presence and tightenning (if equipped)
Pulleys, chains and wire rope
No deterioration and visible damage
No wear more than 2%
Pulleys and clamps are not worn, rusted or damaged
No radial gap > 0.5 mm on the pulleys on the pin
Absence of crack, damage or break of the device of fixation of chains
and wire rop
Summary of Contents for HT21RT O
