Haulotte Group HT21RT O, Maintenance Book

Page: 92 / 282

92 4000511390 E03.16 USA / GB
Chassis and turntable
Tires (Tyres) and pressures - Wheel replacement
MS0006
4 - Wheel and tires/tyres inspections
Replace the wheels and the tires/tyres if any of the following conditions exist :
• Presence of cracks, damage, deformation or other faults on the hub
• Damage to the tire :
• Cut or hole > 3 cm (2 in) in the rubber side wall.
• Blister or pronounced lump on the external and lateral wall.
• Damaged wheel stud.
• Damage or wear on the side wall to the extent that the reinforcing wire is
visible.
• Consistent wear of the ground contact surface greater than 25%
Tires and rims are critical components for the stability of the machine. For safety reasons. :
• Use only HAULOTTE® spare parts according to the technical characteristics of the machine. Refer to the spare parts
catalog.
• Never replace foam filled tire with a pneumatic (air filled) tire. .