![background image](http://html1.mh-extra.com/html/haulotte-group/ht21rt-o/ht21rt-o_maintenance-book_2107918012.webp)
12
4000511390
E03.16
USA / GB
HT21RT O - HT21RT O SW - HT61RT O - HT21RT PRO - HT21RT PRO SW - HT61RT PRO -
HT23RTJ O - HT23RTJ O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
B
Safety
Never leave the hydraulic cylinders fully extended before switching off the machine, or when stationary for an
extended period of time. Keep the elements of the machine in configuration of maintenance thanks to mechanics
devices.
Report that the machine is under maintenance by tagging the platform and ground control boxes.
Note :
• Using the machine during maintenance is strictly forbidden.
• Do not climb onto the covers.
• The handling of parts must be carried out using appropriate equipment (Chains, Lifting slings, Lifting
anchors).
• Plug the end of any hoses removed, and cap any open ports to prevent contamination during
maintenance.
Return the machine to operating configuration after maintenance has been completed :
1.
Remove the turntable rotation locking pin.
2.
Pull the E-stop button.
1.2 - UNCONTROLLED MOVEMENT HAZARD
Be aware of uncontrolled movement and always respect the following :
• Maintain clearance from high voltage lines.
• Maintain clearance from generators, radar, electromagnetic fields.
• Never expose the batteries or electrical components to water (high pressure washer, rain).
• Never tow the machine over extended distances.
• In case of a machine breakdown, it is possible to tow short distance to load it onto a trailer.
• Never leave the hydraulic cylinders fully extended before switching off the machine, or when
stationary for an extended period of time.
• Retract and lower the boom to the stowed position rotate the turntable so that the boom is between
the non-steering wheels.
• Select a safe parking location, on a firm level surface, clear of obstruction and traffic.
• Ensure all compartments are closed and secured.
• Chock the wheels.
Summary of Contents for HT21RT O
