HAULOTTE GROUP
9 AXLE AND RELATED COMPONENTS
116
SET UP AND ADJUSTMENT (CONTINUED)
Wheel nuts / bolts should be torqued before the first road use and after each wheel removal. Check
and re-torque after the first 10, 25, and 50 miles (16, 40, and 80 kilometers). Check periodically
thereafter.
TABLE 9-1. WHEEL TORQUE REQUIREMENTS
(For Dexter Steel Wheels Prior to June of 2004)
TORQUE SEQUENCE
Wheel Size
1st Stage
2nd Stage
3rd Stage
12”
20-25 ft-lb (27-34 N-m)
35-40 ft-lb (47-54 N-m)
50-75 ft-lb (68-102 N-m)
13”
20-25 ft-lb (27-34 N-m)
35-40 ft-lb (47-54 N-m)
50-75 ft-lb (68-102 N-m)
14”
20-25 ft-lb (27-34 N-m)
50-60 ft-lb (68-81 N-m)
90-120 ft-lb (122-162 N-m)
15”
20-25 ft-lb (27-34 N-m)
50-60 ft-lb (68-81 N-m)
90-120 ft-lb (122-162 N-m)
16”
20-25 ft-lb (27-34 N-m)
50-60 ft-lb (68-81 N-m)
90-120 ft-lb (122-162 N-m)
16.5” x 6.75”
20-25 ft-lb (27-34 N-m)
50-60 ft-lb (68-81 N-m)
90-120 ft-lb ( 122-162 N-m)
16.5” x 9.75
55-60 ft-lb (75-81 N-m)
120-125 ft-lb (162-169 N-m) 175-225 ft-lb (237-305 N-m)
14.5 Demont
Tighten sequentially to
85-95 ft-lb (115-128 N-m)
17.5” Hub Pilot
Clamp Ring & Cone Nuts
50-60 ft-lb (68-81 N-m)
100-120 ft-lb (135-162 N-m) 190-210 ft-lb (257-284 N-m)
17.5” Hub Pilot
5/16” Flange Nuts
50-60 ft-lb (68-81 N-m)
90-200 ft-lb (122-270 N-m)
275-325 ft-lb (372-441 N-m)
Maximum Wheel Fastener Torque
The wheel mounting studs used on Dexter axles conform to the SAE standards for grade 8. The
maximum torque level that can be safely applied to these studs is listed in the following chart:
Stud Size
Maximum Torque
1/2”-20 UNF, class 2A
120 ft-lb (162 N-m)
9/16”-18 UNF, class 2A
170 ft-lb (230 N-m)
5/8”-18 UNF, class 2A
325 ft-lb (440 N-m)
CAUTION
Exceeding the above listed torque limits can damage
studs and / or nuts and lead to eventual fractures and
dangerous wheel separation.
Summary of Contents for 3522A
