HATO SWING 400, Assembly And Operation Manual

Page: 4 / 36

Do not install gate automation in environments with explosive mixtures!
Danger of electric shock!
Use gloves!
Use safety glasses!
Do not remove the cover!
SAFETY NOTES
•
Any repairs may only be performed by qualified persons
•
Only use a technically sound drive in accordance with its intended purpose, taking into account
the safety and hazard rules, observing the installation and operating instructions.
•
Defects that may affect safe use must be repaired immediately.
•
The power cord may only be replaced by authorized service or qualified personnel.
•
Keep the area of door and drive operation clean and tidy.
•
When the gate is moving, there must be no children, adults, animals or any objects in its work
area.
•
Be especially careful while the gate is in motion.
•
The user should only use the remote control when the gate with automatic control is within his
sight. All control activities must be performed only in places where the gate with automatic
control is completely visible and free from obstacles.
•
Only drive through the gate when it is fully opened.
•
It is forbidden to walk over or drive through while the gate is moving.
•
It is forbidden to lift or move objects or people with the gate.
•
Do not create any mechanical stresses on the gate.
•
Do not put your hands or other body parts into the moving gate or its moving parts.
•
Do not insert any objects or mechanical elements into the moving gate or its moving parts.
•
Keep the automatic system controls out of the reach of children.
•
Children and mentally handicapped people cannot control the gate on their own.
•
Use only original spare parts
•
Disconnect power before changing bulb or fuse
•
In the event of automatic closing of the gate, secure the edges in accordance with the
applicable standards.
•
Regularly check the operation of safety elements.
•
Emergency opening can only be performed with power disconnected.
•
Use the drive in a non-explosive atmosphere.
•
Do not use the drive in a room with an aggressive atmosphere.
•
Fluorescent lamps must not be used as traffic lights.
•
Carry out inspection and maintenance work at least every 6 months.
APPLICATION OF THE AUTOMATIC SYSTEM
The SWING 400/600 operator has been designed and manufactured to open gates with a maximum
leaf length of 5 m and a maximum weight of 200 kg. and the area of the wing building 2m2. The HATO
company is not liable if the SWING 400/600 drive is used for purposes other than those specified.
Gate automation can be controlled remotely with a remote control or from close proximity with a
4